PAPER TEMPLATE GUIDANCE
This page serves as a replacement for the instructions that were embedded into former ICES Paper Templates. The guidance and instructions here will help the author to create a paper consistent with the ICES published proceedings. There are many NEW requirements so please review carefully.
Do not hesitate to reach out to info@ices.space for any questions. We are here to help!
The ICES proceedings collection is housed in the DSpace repository of the Texas Tech University Libraries, and effective April 2027 as a University funded by the state of Texas, the collection and its contents must comply with Title II of the Americans with Disabilities Act [Web Content Accessibility Guidelines (WCAG) Version 2.1, level AA] For more details go to: https://www.ada.gov/resources/2024-03-08-web-rule
All authors are REQUIRED to use the ICES 2027 Paper Template and follow all instructions required to make paper(s) accessible and compliant with this federal rule. Failure to meet accessibility requirements may result in a delay in publication as each paper will need to be reviewed by Texas Tech Univeriversity Libraries to confirm compliance, and may require additional edits to meet all requirements.
Please carefully review the accessibility requirements outlined on this Template Guidance page and incorporate these items into the Draft Paper.
Accessibility Requirements & Guidance
Embedding accessibility features in written papers and figures enables those using assistive technology (like screen readers) to better read and navigate the document. Microsoft Word has tools to scan and check documents for such features. Many of these features are already included in the ICES Paper Template but some require additional steps by the author.
Word Document Accessibility Guidelines
- Use built-in heading styles (Heading 1, Heading 2, etc.) for all headings
- Use built-in list styles for bulleted and numbered lists
- Use meaningful hyperlink text (avoid “click here” or bare URLs)
- Set document language in Review tab > Language
- Run the built-in Accessibility Checker (Review tab > Check Accessibility)
Creating Alt-text for Images, Figures and Tables
- Include a description including data, trends, and conclusions directly in the text when referencing any image
- Add alt text to all images (right-click image > Edit Alt Text)
- See Texas Tech University guide for creation
- Mark decorative images as decorative (check “Mark as decorative” in Alt Text pane)
- Provide a short description of the image in the alt box
- Create simple table structures with header rows
- Ensure sufficient color contrast (use WebAIM Contrast Checker); Minimum 4.5:1 for normal text, 3:1 for large text
ACCESSIBILITY BEST PRACTICES
ICES PAPER STRUCTURE
The guidance below isolates each section of the paper and describes specific requirements to maintain consistency across all papers in the ICES proceedings collection. There is an editorial check conducted after the Draft Paper due date to identify papers not in compliance. Authors will be required to correct any errors prior to Final Manuscript submission.
* Indicates required section
2. Title*
- A) The title of your paper should be typed in bold, 18-point type, with capital and lower-case letters (title capitalization, not all caps), and centered at the top of the page.
- B) This title should be the same on the manuscript and in Easy Chair.
- C) If the title has changed from the original abstract submission, please make the necessary change in Easy Chair by following these steps:
· Go to your submission in Easy Chair
· Select update information in the upper right menu
· Update title here
· Click red update information button at the bottom of the page
3. Author Listing*
- A) The names of the authors, business or academic affiliation, city, and state/province should follow on separate lines below the title
- B) The names of authors with the same affiliation can be listed on the same line above their collective affiliation information.
- C) Author names are centered, and affiliations are centered and in italic type.
- D) The affiliation line for each author is to include that author’s city, state, and zip/postal code (or city, province, zip/postal code and country, as appropriate).
- E) The first footnote (lower left-hand side) is to contain the job title and department name, and street address/mail stop for each author.
- F) Each person who had made a significant contribution to the work should be included.
- G) A person who made only minor contributions, such as reading the paper and giving feedback, should not be included in the list of authors. It may be more appropriate to include this person in the acknowledgments section.
- H) Due to space limitations, only the first 8 authors from the submission metadata in Easy Chair will be listed in the printed program.
4. Abstract*
- A) Should appear at the beginning of your paper, bold, indented 1/2” on each side, and separated from the rest of the document by two blank lines
- B) Limit to one paragraph long (not an introduction, no reference numbers)
- C) Indicate subjects dealt with in the paper and state the objectives of the investigation.
- D) Newly observed facts and conclusions of the experiment or argument discussed in the paper must be stated in summary form; readers should not have to read the paper to understand the abstract.
- E) IF the abstract has changed from the original submission, please make the necessary change in Easy Chair by following these steps:
click to expand
· Go to your submission in Easy Chair
· Select update information in the upper right menu
· Update abstract content here
· Click red update information button at the bottom of the page
6. Copyright
- A) If your organization requires a copyright notice on the paper, it should be included in the footer at the bottom of the first page in the template.
- B) If a copyright notice is not required, then delete the footer on the first page.
- C) The ICES organization does NOT claim the copyright to the papers.
- D) If the author works for the United States Federal Government and the work reported in the paper was performed as part of their employment, the work is considered public information and is not eligible for copyright.
10. Conclusion
- A) A conclusion section is not required, though it is preferred.
- B) Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion.
- C) A conclusion might elaborate on the importance of the work or suggest applications and forward work.
- D) The conclusion section is the last section of the paper that should be numbered
13. References*
- A) Use the Bibliography function in Word to generate references at the end of the document and should be in numerical order
- B) Corresponding bracketed numbers are used to cite references in the text and can be automatically inserted by using the “Insert Citation’ button and with the IEEE style for journal articles [1], books [2], ICES papers (using Conference Proceedings option and including the paper number in the Year field) [3], reports [4], and online publications [5]
- C) Other citations should follow IEEE guidelines as defined in the citation options.
- D) In the reference list, give all authors’ names; do not use “et al.” unless there are six authors or more
- E) Papers that have not been published should be cited as “unpublished”; papers that have been submitted or accepted for publication should be cited as “submitted for publication.”
- F) Private communications and personal Web sites should appear as footnotes rather than in the reference list
- G) When using the Word version of this template to enter references, select the “references” style to automatically format your references
- H) If you prefer to type in each reference independently, simply delete the automated field below and manually type in each reference
- I) You are not required to indicate the type of reference
- J) Government agency reports do not require locations
- K) For reports such as NASA TM-85940, neither insert nor delete dashes; leave them as provided by the author
- L) Place of publication should be given, although it is not mandatory, for military and company reports
- M) Always include a city and state for universities
(different types are shown here for illustrative purposes only)
| [1] | G. H. Vatistas, S. Lin and C. K. Kwok, “Reverse Flow Radius in Vortex Chambers,” AIAA Journal, vol. 24, no. 11, pp. 1872-1873, 1986. |
| [2] | R. Peyret and T. D. Taylor, Computational Methods in Fluid Flow, 2nd ed, Chapters 7, 14., New York: Springer-Verlag, 1983. |
| [3] | F. J. Guerrero-Gonzalez, P. Reiss, M. L. Donten, A. Lovagnini and L. Celiento, “Low-temperature Molten Salt Electrolysis for Lunar Regolith Reduction,” in 54th International Conference on Environmental Systems, Prague, Czechia, ICES-2025-441, 2025. |
| [4] | C. J. Nietubicz, J. E. Heavey and J. L. J. Steger, “A General Curvilinear Grid Generation Program for Projectile Configurations,” U.S. Army Ballistic Research Lab., Rept. ARBRL-MR03142, Aberdeen Proving Ground, MD, Oct. 1981. |
| [5] | A. Vickers, “”10-110 mm/hr Hypodermic Gravity Design A,” Rainfall Simulation Database,” [Online]. Available: http://www.geog.le.ac.uk/bgrg/lab.htm. [Accessed 15 March 1998]. |
General Requirements & Guidance
This section describes some requirements and provides guidance and best practices for writing an ICES paper.
**Indicates required item for the Draft Paper only
1. Page Limit & File Type
- A) Paper length for the Final Manuscript (including references and appendices) is 15 pages or fewer
- B) All file uploads for DRAFTS and FINAL versions must be in .docx format.
- There is a specific procedure to convert .docx files to PDF that properly preserves accessibility features. ICES staff will be converting FINAL paper files to PDF this year in order to ensure accessibility conversion.
2. Watermark**
- A) The watermark (2027) sits on each page of the template – this helps us identify that the current year’s template is in use
- B) All versions of the Draft Paper should retain the watermark
- C) The Final Manuscript is to be submitted as a Word document (.docx) with the watermark removed
- D) Instructions for removing the watermark:
click to expand
3. Line Numbers**
- A) Line numbers are included in the template to aid in communication between reviewers and authors.
- B) Line numbers should remain on for draft versions of the paper.
- C) Authors should remove the line numbers prior to creating and submitting the final manuscript
4. Footnotes
- A) Footnotes, where they appear, should be placed above the 1” margin at the bottom of the page and be 9 point font
- B) To insert footnotes into the template, select References from the main menu; then Insert Footnote feature
- C) Footnotes are formatted automatically in the template, but if another medium is used, should appear in superscript as symbols in the sequence, *[1], †, ‡, §, ¶, #, **. ††, ‡‡, §§, etc.
5. Grammar & Preferred Usage
- A) Hyphenate complex modifiers: “zero-field-cooled magnetization.” Avoid dangling participles, such as, “Using Eq. (1), the potential was calculated.” [It is not clear who or what used Eq. (1).] Write instead “The potential was calculated using Eq. (1),” or “Using Eq. (1), we calculated the potential.”
- B) A parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this).
- C) (A parenthetical sentence is punctuated within parenthesis.)
- D) In American English, periods and commas are placed within quotation marks, like “this period.”
- E) Other punctuation is “outside”!
- F) Avoid contractions; for example, write “do not” instead of “don’t.”
- G) The serial comma is preferred: “A, B, and C” instead of “A, B and C.”
- H) If you wish, you may write in the first person singular or plural and use the active voice (“I observed that…” or “We observed that…” instead of “It was observed that…”).
- I) Remember to check spelling
- J) If your native language is not English, please ask a native English-speaking colleague to proofread your paper
- K) The subscript for the permeability of vacuum µ0 is zero, not a lowercase letter “o.”
- L) The term for residual magnetization is “remanence”; the adjective is “remanent”; do not write “remnance” or “remnant.”
- M) The word “micrometer” is preferred over “micron” when spelling out this unit of measure
- N) A graph within a graph is an “inset,” not an “insert.”
- O) The word “alternatively” is preferred to the word “alternately” (unless you really mean something that alternates)
- P) Use the word “whereas” instead of “while” (unless you are referring to simultaneous events)
- Q) Do not use the word “essentially” to mean “approximately” or “effectively.”
- R) Do not use the word “issue” as a euphemism for “problem.”
- S) When compositions are not specified, separate chemical symbols by en-dashes; for example, “NiMn” indicates the intermetallic compound Ni0.5Mn0.5 whereas “Ni–Mn” indicates an alloy of some composition NixMn1-x.
- T) Be aware of the different meanings of the homophones “affect” (usually a verb) and “effect” (usually a noun), “complement” and “compliment,” “discreet” and “discrete,” “principal” (e.g., “principal investigator”) and “principle” (e.g., “principle of measurement”)
- U) Do not confuse “imply” and “infer.”
- V) Prefixes such as “non,” “sub,” “micro,” “multi,” and “”ultra” are not independent words; they should be joined to the words they modify, usually without a hyphen
- W) There is no period after the “et” in the abbreviation “et al.”
- X) The abbreviation “i.e.,” means “that is,” and the abbreviation “e.g.,” means “for example” (these abbreviations are not italicized).
6. Document Text* (Fonts, Style, etc)
- A) The default font for ICES papers is Times New Roman, 10-point size
- B) In the electronic template, use the “Text” style to format all primary text for your manuscript
- C) The first line of every paragraph should be indented, and all lines should be single-spaced
- D) Default margins are 1” on all sides
- E) In the electronic version of this template, all margins and other formatting is preset
- F) There should be no additional lines between paragraphs
Extended quotes, such as this example, are to be used when material being cited is longer than a few sentences, or the standard quotation format is not practical. In this Word template, the appropriate style is “Extended Quote.” Extended quotes are to be in Times New Roman, 9-point font, indented 0.4” and full justified.
7. Heading Structure*
- A) Major headings (“Heading 1” in the template style list) are bold 11-point font, centered, and numbered with Roman numerals
- B) Subheadings (“Heading 2” in the template style list) are bold, flush left, and numbered with capital letters
- C) Sub-Subheadings (“Heading 3” in the template style list) are italic, flush left, and numbered (1. 2. 3. etc.)
Using the template to generate your paper will automatically create the heading structure, and generate Bookmarks required for accessibility compliance.
8. Images, Figures & Tables
- A) All artwork, captions, figures, graphs, and tables will be included exactly as submitted. Be sure to position any figures, tables, graphs, or pictures as you want them to appear. See below for figure accessibility guidelines
- B) Tables and figures of all types may be inserted into text boxes (or frames, if text boxes are not practical) as illustrated here, or directly in line with the text. Text boxes should have no background and no outlines. Both the illustration itself and the caption should be included in the same box. In the electronic template, use the “Figure” style from the pull-down formatting menu to type caption text. Figure captions should be bold and justified, with a period and a single tab (no hyphen or other character) between the figure number and the figure description.
- C) Place figure captions below all figures; place table titles above the tables. If your figure has multiple parts, include the labels “a),” “b),” etc. below and to the left of each part, above the figure caption. Please verify that the figures and tables you mention in the text actually exist and that each figure is mentioned in the text as Figure 1 or Fig. 1, as examples. Please do not include captions as part of the figures, and do not put captions in separate text boxes linked to the figures – place the caption separately below the figure in the same text box. Number each different type of illustration (i.e., figures, tables, images) sequentially with relation to other illustrations of the same type.
- D) Figure axis labels are often a source of confusion. Use words rather than symbols. As in Figure 1, write the quantity “Magnetization” rather than just “M.” Do not enclose units in parenthesis, but rather separate them from the preceding text by commas. Do not label axes only with units. As in Figure 1, for example, write “Magnetization, A/m” or “Magnetization, Am-1,” not just “A/m.” Do not label axes with a ratio of quantities and units. For example, write “Temperature, K,” not “Temperature/K.”
- E) Multipliers can be especially confusing. Write “Magnetization, kA/m” or “Magnetization, 103 A/m.” Do not write “Magnetization (A/m) x 1000” because the reader would not then know whether the top axis label in Figure 1 meant 16000 A/m or 0.016 A/m. Figure labels must be legible, approximately 8-12 point type.
ACCESSIBILITY BEST PRACTICES
9. Units of Measurement
- A) Use SI units of measurement. When English units are given preference, the SI equivalent should be provided in parentheses. When SI units are given preference, English units may be provided in parentheses
- B) Use a zero before decimal points: “0.25,” not “.25.” Use “cm2,” not “cc.” Indicate sample dimensions as “0.1 cm x 0.2 cm,” not “0.1 x 0.2 cm2.”
- C) The preferred abbreviation for “seconds” is “s,” not “sec.”
- D) Do not mix complete spellings and abbreviations of units: use “Wb/m2” or “webers per square meter,” not “webers/m2.”
- E) When expressing a range of values, write “7 to 9” or “7-9,” not “7~9.”
- F) For unit formatting, reference IEEE guidelines. Leave a single space (preferably a non-breaking space) between the number and the unit symbol (e.g., 25 kg, 10 V, 5 W)
- G) Do not use a hyphen when a quantity acts as an adjective; keep the space (e.g., a 25 kg sphere, never a 25-kg sphere)
- H) For degrees Celsius (°C), a space is placed before the degree symbol (e.g., 20 °C)
- I) A fixed, non-breaking space is required before the percent sign (e.g., 70 %)
- J) There is an exception for plane angles; do not leave a space before superscript units for plane angles (°, ′, ″), such as 2°3′4″
10. Equations, Numbers, Symbols, & Abbreviations
- A) Equations are centered and numbered consecutively, with equation numbers in parentheses flush right, as in Eq. (1). Insert a blank line on either side of the equation. First use the equation editor to create the equation.
- B) When using Microsoft Word, use either the Microsoft Equation Editor or the MathType add-on (http://www.mathtype.com) for equations in your paper, use the function (Insert>Object>Create New>Microsoft Equation or MathType Equation) to insert it into the document.
- C) Please note that “Float over text” should not be selected. To insert the equation into the document:
- Select the “Equation” style from the pull-down formatting menu and hit “tab” once
- Insert the equation, hit “tab” again
- Enter the equation number in parentheses
- D) Define abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Very common abbreviations such as AIAA, SI, ac, and dc do not have to be defined.
- E) Abbreviations that incorporate periods should not have spaces: write “P.R.,” not “P. R.”
- F) Delete periods between initials if the abbreviation has three or more initials; e.g., U.N. but ESA
- G) Do not use abbreviations in the title unless they are unavoidable